Skip to content
LOS Analyzer

Crane · 2026

Crane

Burlington, VT · near Patrick Leahy Burlington Intl (0.1 mi)

Returned to proponentDetermined - No Hazard200 ft AGL

What this outcome means

The FAA sent the case back to the filer rather than issuing a determination. This is the most common non-clean outcome and usually means something has to change or be supplied before the study can finish — not that the project was refused.

The proposal, in the filer's words

"This plan establishes the Hoisting and Rigging for the BVT ATCT HVAC Replacement Project in Burlington VT. Demag Riggers and Crane Service will be the crane supplier and operator. Demag will stage the crane on the North West side of the facility and hoist the equipment onto the base building roof and within the ATCT."

Filing details

Case number (ASN)
2026-ANE-912-NRA
Structure
Crane
Type
Crane
Category
Crane
Height above ground
200 ft
Height above sea level
530 ft
Site elevation
330 ft
Notice of
New Construction
Duration
Temporary
Marking & lighting
—

Timeline

Filed
June 9, 2026
Determined
September 10, 2026
Determination expires
March 10, 2028

A determination that lapses before the structure is built has to be re-filed. The FAA does not send a reminder.

Who filed it

Sponsor
Federal Aviation Administration
Representative
Andre Crespo

Names are shown as they appear in the FAA's public record. How we handle names

See every 2026 filing by Federal Aviation Administration →

Location

Coordinates
44.470842, -73.154780
Degrees / minutes / seconds
44°28'15.0"N 73°09'17.2"W
County
Chittenden

Other filings within 5 miles

Organisation-sponsored 2026 filings whose coordinates sit near this one.

See every 2026 filing near Patrick Leahy Burlington Intl →

About this record

This page is a readable copy of a public record published by the FAA's Obstruction Evaluation / Airport Airspace Analysis system. It is not the official record and may lag it. For the authoritative case status, search this ASN at the FAA's OE/AAA portal. If something here is wrong, email support@idea-engine.studio and we will correct it.

Source: FAA Obstruction Evaluation / Airport Airspace Analysis (OE/AAA) public archive (oeaaa.faa.gov), data as of September 12, 2026. Compiled by LOS Analyzer (Idea Engine LLC). This is not an official FAA record or an FAA determination; the FAA's portal is authoritative. LOS Analyzer is not affiliated with or endorsed by the FAA.

Screening a structure of your own?

Check Part 77 and the tower's line of sight before you file

LOS Analyzer screens a proposed structure against FAA Part 77 surfaces and the control tower's sightline to the runway, terrain-aware, in minutes. It is a preliminary screening — not an FAA determination and not a substitute for a licensed engineering review.